ICOM Base Transceivers - Single receiver Receive System - 1 Antenna Ports - LDG Electronics Brand - Free Shipping on Most Orders Over $99 at DX Engineering (2024)

On Sale

ICOM IC-718 HF All Band Transceivers

ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either!Some quick specs:* 160 through 10 meter operation (60 meter channels not available)* Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode)* 30 kHz through 30 MHz general coverage receiver* 1 Hz frequency resolution* 101 memory-scan channelsOther great features include:* Includes DSP noise reduction and auto notch (UT-106 module)* RF gain control* RF attenuator and preamplifier* Adjustable level noise blanker* IF shift control* Receiver Incremental Tuning (RIT)* Band stacking register* Tuning rate auto step-up function* Digital S/RF meter* VOX operation* Adjustable microphone audio compressor* Electronic CW keyerNote: For additional information, please look at the files under the "Documentation" tab.Supplied accessories include:* Hand-held microphone* DC power cable and spare fusesThese little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.

4.89 out of 5 stars ( 46 )

$1,099.95


$859.95

Instant Rebate

Mail in Rebate

ICOM IC-7300 HF Plus 50 MHz Transceivers

ICOM IC-7300 HF Plus 50 MHz Transceivers employ a new-technology real-time touch-screen spectrum scope that leads its class in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to another signal.When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune to the desired signal.The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of IC-7300 radios and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the real-time spectrum scope.The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either transmit or receive audio may be displayed on the FFT scope, with the waterfall function and the oscilloscope.The large 4.3 in. color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.IC-7300 transceivers employ an RF direct-sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading-edge technology; creating a new era in amateur radio.The new "IP-plus" function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion.IC-7300 transceivers' RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.IC-7300's have 15 discrete RF band-pass filters. The RF signal is passed through only one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters.The built-in antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. NOTE: Do not use the Enforced Tuning function except in case of an emergency.Transmitter output power may be automatically reduced.IC-7300 transceivers can store various contents into an SD card, such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Updated personal and firmware data can also be stored to the SD card for easy setting.To offer superior sound quality, a new speaker unit has been incorporated and is designed into the aluminum die-cast chassis; not just squeezed in as a necessity.Other IC-7300 features include:* HM-219 hand microphone supplied* Large, effective cooling fan system* Multi-function meter* 101 memory channels (99 regular, plus 2 scan edges)* Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed) * CW functions: Full break-in, CW reverse, CW auto tuningNote: For additional information, look at the files under the "Documentation" tab.The innovative features included in ICOM's IC-7300 offer tremendous advantages and represent a paradigm shift for its modest price point. ICOM says of its 7300 that "The Real HF Fun Starts Here." Order one of their ICOM IC-7300 HF Plus 50 MHz Transceivers and discover the fun to be had with leading-edge technology transceivers from DX Engineering!

4.92 out of 5 stars ( 473 )

$1,099.95

ICOM Base Transceivers - Single receiver Receive System - 1 Antenna Ports - LDG Electronics Brand - Free Shipping on Most Orders Over $99 at DX Engineering (2024)

References

Top Articles
Latest Posts
Article information

Author: Annamae Dooley

Last Updated:

Views: 5808

Rating: 4.4 / 5 (45 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Annamae Dooley

Birthday: 2001-07-26

Address: 9687 Tambra Meadow, Bradleyhaven, TN 53219

Phone: +9316045904039

Job: Future Coordinator

Hobby: Archery, Couponing, Poi, Kite flying, Knitting, Rappelling, Baseball

Introduction: My name is Annamae Dooley, I am a witty, quaint, lovely, clever, rich, sparkling, powerful person who loves writing and wants to share my knowledge and understanding with you.